Apikon Indonesia, PT (hereafter called Apikon) has been established since June 25, 2003 , just after the closing of PT. Kontrol Teknik Indonesia , following the restructuring of Control Techniques after being acquired by The Emerson Group. Apikon Indonesia, PT is therefore the new umbrella of PT. Kontrol Teknik Indonesia continuing the works & businesses of Control Techniques Indonesia drived by mostly ex PT. Kontrol Teknik Indonesia's personnel.

Apikon Indonesia, PT is exclusively dedicated to the sales, application and technical support of Control Techniques & Emerson Drives in Indonesia. As Authorized Distributor of Control Techniques, Emerson Industrial Automation Drives, we are closely supported by Control Techniques & Emerson Industrial Automation Drives worldwide and our engineering staff are well qualified in drives technology and experienced in the application of drives for industry.

Apikon Indonesia, PT is also the authorized distributor for industrial drive complementary product namely AC & DC Motor from Sicmemotori Italy/UK and DC Motor of T-T Electric Denmark/France as well as Soft Starter & Digital SDF Starter from Fairdford Electronics UK.



APIKON INDONESIA, PT
Ruko TPI A-30
Raya Menganti - Wiyung
Surabaya - 60228
Tel : +62 31 7673350
Fax : +62 31 7673357

Power Range - 0.37kW - 1.5 mW

Global Power Supplies - 200/400/575/690Volts

Unidrive SP Panel Mount drives are standard AC input, AC output modules for installation within a control panel. The modules are easy to install and commission and can be applied in a wide range of applications. Unidrive SP can be configured using the keypad to operate in the following modes:

* Open loop V/Hz AC drive
* Open loop Vector AC drive
* Closed loop AC drive
* AC servo amplifier for rotary and linear motors
* Regenerative (Active) power supply

Three Control Techniques click-in option module slots allow the drive to be uniquely customised to your application allowing you to select the level of intelligence, connectivity and I/O you need.Unidrive SP Panel Mount Range
Applications

Due to the inherent performance and flexibility of Unidrive SP, potential areas for its application are limitless; the drives intelligence and dynamic response allow it to be applied in the most demanding applications while the compact dimensions make it ideal in new and retrofit energy saving installations.

Typical applications include:

* High speed machines
* Crane and hoist
* Lift and elevator controls
* Pulp and paper machines
* Energy saving with fans and pumps
* Textile machines
* Materials handling systems
* Printing
* Converting
* Plastics and rubber extrusion processing machines
* Metal production and processing
* Marine applications

Download the Unidrive SP General Spec.
Download the Unidrive SP Presentation Show
Download the Unidrive SP Flas Aplication

1/3 to 200 hp (0.25kW to 132kW)

Commander SK is easy-to-drive and great value. The drive modules are ultra compact and offer excellent motor control. With onboard intelligence, I/O, Ethernet and fieldbus communications options, Commander SK allows you to do much more than you would expect from a general purpose drive.
Applications

Commander SK is ideal for a wide range of applications, including:

* Pumps
* Fans
* Conveying
* Mixing
* Chemical dosing
* Centrifuges
* Door and barrier opening systems
* Food and beverage applications


In these applications energy efficiency and productivity improvements often result in a rapid return on project investments.
Benefits

* Ultra-compact modules resulting from advanced thermal design, state-of-the-art power technologies and the use of a rigid SMC plastic chassis
* Optimised for both heavy duty and fan and pump applications
* Can be easily integrated within an automation system using Control Techniques click-in fieldbus option modules including Profibus, DeviceNet and CanOpen
* Ethernet connectivity allows global drive access for monitoring, configuring and troubleshooting
* Optional SmartStick allows the drive configuration to be stored and replicated - ideal as a parameter back up and for mass/batch production applications
* Optional LogicStick adds program memory for onboard PLC functionality, adding intelligence to the drive. This can remove the need for external PLCs and reduces size and costs
* Easy to use remote mounting keypad with IP65 protection
* Operation with global power supplies ' 100V, 200V, 400V, 575V and 690V
* The built in EMC filter is suitable for most applications and can be easily switched in or out of circuit. When more arduous EMC standards must be met, such as for residential environments a range of compact footprint mounting filters are available
* The drive has an RS485 serial port as standard and is supplied with software and documentation CD for easy configuration and monitoring
* Low power drives may be mounted on DIN-rail for quick and easy installation
* The drive has an integrated keypad with all the parameters you need for typical applications detailed on the drive
* Worldwide product expertise and support
* Worldwide certifications including CE and UL

Download the Commander SK General Spec.
Download the Commander SK Presentation Show

AC Variable Speed Drive 1/2 hp to 10 hp (0.37 kW to 7.5kW)

The Commander SX from 0.37kW to 7.5kW is an IP66 (NEMA 4X) protected drive that enables users to mount the drive directly next to the motor giving significant cabling, cabinet and installation savings. Typical applications include Fans, Pumps, Conveyors, Blowers, Ovens and Chillers.
Typical Applications

Commander SX is suitable for use in machines where it is useful to site the drive in proximity to the motor and where dirt, dust and other pollutants need to be regularly washed away. For example:

* Food
* Drink
* Paper
* Textile
* PackagingKey Benefits

* IP66, NEMA 4X enclosed drive - no need for separate cabinet
* Designed for 'direct to wall' or 'next-to-motor' mounting - avoiding cabling, cabinet and installation costs
* Easy setup and commissioning - the first 10 parameters cover 80% of applications
* More than 10 common preset drive applications
* Surface and corners designed to maximise washdown effectiveness
* Integral EMC filter (to generic and drive standards) for units up to 4 kW (5hp) - IP66 EMC filters, from 5.5 kW (7.5hp) as option
* Robust industrial housing with simple speed control interface - no drive installation specialists required
* Industrial standard EN954-1 categories 2 and 3 achieved through addition of PX-Secure option

Download the Commander SX General Spec.
Download the Commander SX Presentation Show

25 A - 1850 A in Both Single and 4 Quadrant

5 to 1000 hp ( 75kW to 750kW )

Mentor II is the World's favourite DC drive, installed in hundreds of thousands of applications, providing the reliability, power and control to increase productivity for both new machines and applications where DC motors are already installed.

• Up to four Mentor II drives can be connected in parallel and series to quadruple the power range. This modular solution simplifies the handling of the individual drive units and makes the maintenance and servicing easier
• Drives can be arranged to provide 6, 12 or 24 pulse systems. Higher pulse systems reduce the harmonic distortion of the mains supply current

Applications

Many DC drive applications are for retrofit systems to improve the performance and prolong the life of existing plants and machinery. New applications for DC drives include:

• High Power applications
• Winding and unwinding
• Pulp and Paper processing
• Metal Rolling and processing
• Ski lifts

  
  

Benefits

• Powerful onboard intelligence allows the drives functionality to be finely customised to the application and allows the removal of troublesome analogue control circuits

• Standard winder and flying shear software allow Mentor to be integrated quickly and easily
• Modular approach to high power drives allows multiple Mentor II drives to be connected in parallel or series to economically achieve the required motor current and voltage rating
• MentorSoft, a windows based software, provides an intuitive environment for configuring the drives functionality
• Our knowledge and experience in DC drive systems allows us to recommend the best solution for your individual circumstances
• Mentor II integrates closely with the Control Techniques AC drives using CTNet, drive-to-drive communications
• Regenerative and non-regenerative modules available to suit your application
• Fieldbus options including Profibus and DeviceNet allow Mentor to be integrated within an automation system
• Worldwide expertise and support

Download The Mentor II General Spec.
Download The Mentor II Presentation Show

Our low cost DC drives offer efficient, cost effective, speed control of conventional shunt wound and permanent magnet DC motors. Four models are available:

* Puma - 0.18 to 0.37kW
* Cheetah - 0.55 to 1.5kW
* Lynx - 0.55 to 7.5kW
* 4Q2 - 0.55 to 7.5kW

Key Features

* Operate in speed or torque control mode
* Armature/tacho feedback scaling
* Current feedback scaling
* Separately adjustable speed acceleration / deceleration ramp
* Accepts 0-10V and 4-20mA torque and speed reference
* Cheetah SM is available in an optional IP40 rugged enclosure
* The 4Q2 model provides full quadrant control of speed and torque

PUMA

CHEETAH

LYNX

4Q2

Download The Small DC Drives General Spec.
Download The Small DC Drives Presentation Show

Unimotor FM 0.72Nm - 136Nm

Unimotor FM is a high performance brushless AC servo motor range matched for use with Control Techniques drives. FM is an acronym for Flexible Motor, designed to accommodate a wide range of applications. The motors are available in seven frame sizes with various mounting arrangements and motor lengths.
Applications

Unimotor FM is suitable for applications where precision motion and/or dynamic control is required.

Typical applications include:

* High speed machinery
* Flying shear and rotary knife applications
* Pick and place
* Materials handling
* Printing
* Textile machinery

Benefits

* Unimotor FM allows various feedback devices to be used. As standard an incremental encoder is fitted as this offers an optimum balance of cost and performance. SinCos and SLM feedback can be selected for increased resolution and Resolver feedback is available for increased reliability in extreme environments.
* High peak torque values allow smaller motors to be used where the RMS value is low but the maximum torque is high.
* A wide selection of ready made cables are available for quick and easy connection to Control Techniques drives.
* High inertia versions are available to allow the motor inertia to be more closely matched to the load inertia for increased performance and stability.
* IP65 environmental protection is standard.
* Motor brakes may be integrated within the motor. A choice of parking brake or high energy dissipation brake is available.
* Flexibility of the Unimotor range ensures the best fit for your application; as well as the various physical sizes and feedback devices available, options extend to the type of connectors fitted.
Download the Unimotor Brochure

Emerson is the worlds largest manufacturer of motors for industrial and commercial equipment, Control Techniques has access to the extensive product range from our sister company - Leroy Somer. LS Motors

Leroy Somer specialise in the design and manufacture of industrial AC and DC electric motors, mechanical power transmissions and alternators. Leroy Somer operate 38 production facilities in Europe, USA, China and India, employing over 10,000 people.

Leroy Somer Motors

Leroy Somer LS, LSMV and FLS motors offer a standard series of AC motors that cover the power range from 0.55kW to 750kW. The rugged and flexible design means that the motors can be applied in virtually any application.

Efficient PerformanceMotor Design

The electrical, magnetic and mechanical design of the motors have been developed using sophisticated modelling techniques such as finite element analysis that ensure exceptional thermal and torque generating performance and optimum motor reliability. Leroy Somer motors are high efficiency to minimise energy consumption which, combined with Control Techniques drives, offers an energy optimised solution for your applications.

High levels of shock and vibration resistance ensure the motors are reliable in the most demanding applications such as steel production, dock cranes or cement works.

Flexible Power

Leroy Somer motors are available with a wide range of choices to ensure the motor matches your application needs. Various feedback devices, insulated bearings, safety brake and thermal protection methods are available. FLS motors can be specified with CORROBLOC for an anti-corrosion finish that enables the motors to be used in humid, corrosive or harsh environments.

Global Service

A standard range of motors are available for immediate delivery up to 300kW at 400 Volts. Control Techniques and Leroy Somer sales and support centres are located around the World to ensure that service and expertise are just around the corner.

SM-Applications Lite V2

The SM-Applications Lite module is designed to provide programmable control for standalone drive applications or when the drive is connected to a centralised controller via I/O or Fieldbus. SM-Applications Lite may be programmed using ladder logic with SyPTLite or can make use of the full automation and motion capabilities contained within SyPTPro.

* Easy Powerful Configuration ' SM-Application Lite can be used to tackle automation problems from simple start/stop sequencing with a single drive to more complex machine and motion control applications.
* Real Time Control 'The SM-Applications Lite module gives you real-time access to all of the drives parameters plus access to data from I/O and other drives. The module uses a high speed multi-tasking operating system with task update times as low as 250us. Tasks are synchronised to the drives own control loops to give you the best possible performance for drive control and motion.

SM-ApplicationsSM-Applications Plus

SM-Applications offers all of the features of the SM-Applications Lite module but with additional communications and high speed I/O. SM-Applications is programmed using SyPTPro system programming tool.

* Inputs/Outputs ' The module has two digital inputs and two digital outputs for high-speed I/O operations such as position capture and actuator firing.
* High speed serial port - The module features a serial communications port supporting standard protocols such as Modbus for connection to external devices such as Operator Interface panels.
* Drive-to-drive communications - SM-Applications option modules include a high speed drive-to-drive network called CTNet, this network is optimised for intelligent drive systems offering flexible peer to peer communications. The bus has the capability to connect to remote I/O, operator panels, Mentor DC drives and PCs using an OPC server.


SM-RegisterSM-Register New - High Speed Motion & Registration Control

SM-Register is designed to provide a flexible, high performance solution for programmable motion requiring high speed registration features. It is ideal for applications such as printing, packaging and cutting machinery.

* Motion programming using PLCopen or Control Techniques' Advanced Position Controller (APC)
* Programmable in user defined units
* Two fully independent registration capture channels
* Storage for 256 events per channel, microseconds apart
* Pattern recognition
* Speeds in excess of 1000m/min can be handled
* Ability to filter unwanted marks (i.e. splashes, dirt, text etc)
* Filtering capability:
o Minimum and/or maximum pulse width
o Distance from previous edge
* Compensation for registration sensor throughput delay


SM-EZ MotionSM-EZ Motion

The SM-EZ motion option module and Power Tools Pro software provides a user friendly environment for motion programming. The EZ-Motion approach is ideal for applications that are low volume and low engineering time.

* Simple drag & drop programming allows you to create programs 'out of the box' without having to write a single line of code
* Programming completed in 5-steps, the software guides you through drive configuration, I/O configurations and programming steps
* Familiar Windows'-based environment with simple data entry
' 'Fill-in-the-Blank' values
' 'Point and Click' Radio Buttons
' 'Scrolling' menu selections
' 'Drag and Drop' parameters
* The module has four digital inputs and two digital outputs for high-speed I/O operations


LogicStickLogicstick

Inserting the LogicStick into the front of the drive adds the memory required to allow the Commander SK to execute a ladder logic PLC program. The PLC program is able access the drive parameters, option module I/O and Real Time Clock (RTC).